Connect to Azure VMware Solution (AVS) using VPN

by | Sep 15, 2020 | Azure, Technology, Uncategorized | 0 comments

This article is contributed. See the original author and article here.

By: Trevor Davis @tredavis and Carlos Villuendas @CarlosV 

 

Challenge

 

ExpressRoute is the preferred method to connect the customer’s on-premises environment to Azure VMware Solution (AVS), but what happens if you do not have access to ExpressRoute?

 

Solution

 

Connect your on-premises site to AVS using VPN and Azure Virtual WAN.

 

Azure Virtual WAN allows transit connectivity between VPN and ExpressRoute. This implies that VPN-connected sites can communicate with ExpressRoute-connected sites.

Reference: https://docs.microsoft.com/en-us/azure/virtual-wan/virtual-wan-about#transit-er

 

NOTE: Azure VMware Solution (AVS) is connected to the Azure backbone via an ExpressRoute.

 

Architecture

 

AVS - VPN vWAN.png

 

Important points

 

  • VMware HCX is not supported by VMware over VPN. If the customer intends to migrate workloads from on-premises to Azure VMware Solution (AVS), another migration tool needs to be used.
  • This configuration requires the standard Azure Virtual WAN type. Check this article for more details. 
  • When connecting Azure Virtual WAN to a virtual network, make sure that the virtual network does not have any virtual network gateways. This is very important when planning the connection to an existing Azure environment. More details here.

 

Installation

 

After Azure VMware Solution is deployed, you can connect your on-premises environment to Azure VMware Solution (AVS) using VPN and Azure Virtual WAN following these steps.

 

  1. Create an Azure Virtual WAN.
  2. Create a hub.
  3. Create a site.
  4. Connect a VPN site to a hub.
  5. Connect a Vnet to a hub (if needed)
  6. Connect the ExpressRoute circuit to a hub.

 

Steps 1 to 5 are covered in this article: Create a Site-to-Site connection using Azure Virtual WAN

Step 6 is covered in this article: Create an ExpressRoute association using Azure Virtual WAN

 

Installation notes:

 

  • Format the VPN configuration file to make it more readable.

To configure your on-premises VPN device, you will need to download the VPN configuration from the Azure portal, instructions here. The configuration file will look like the following image. Use VS Code to format the configuration file to look like the example in this article.

 

VPN config file.jpg

 

  • You can connect multiple virtual networks to the virtual WAN hub, even virtual networks from different Azure subscriptions.  

 

 

 

 

 

 

 

 

Brought to you by Dr. Ware, Microsoft Office 365 Silver Partner, Charleston SC.

Submit a Comment